亚洲 欧美 偷 自 乱 图片

<tbody id="d4mwg"><pre id="d4mwg"></pre></tbody>

  • <dd id="d4mwg"><track id="d4mwg"></track></dd>

    <em id="d4mwg"></em>

  • <dd id="d4mwg"><center id="d4mwg"></center></dd>

    Wood Profile Sanding Machine

    Delivery term:The date of payment from buyers deliver within days
    • Price:

      Negotiable

    • minimum:

    • Total supply:

    • Delivery term:

      The date of payment from buyers deliver within days

    • seat:

      Guangdong

    • Validity to:

      Long-term effective

    • Last update:

      2019-07-06 03:43

    • Browse the number:

      127

    Send an inquiries
    Company Profile
    Foshan Sandwell Machinery Co.,Ltd.
    Contactaixin:

    sandwell(Mr.)  

    Email:

    telephone:

    phone:

    Arrea:

    Guangdong

    Address:

    No.7 Xingye Road, Changjiao, Lunjiao Town, Shunde District, Foshan City, Guangdong Province, China

    Website:

    http://www.sandwell-sand.com/ http://sandwell.hncarstar.com/

    Product details

    SDG10/13-PPPPCC of SANDWELL Profile Sander

    This machine is used for white blank and paint sanding of all kinds of solid wood special-shaped surface workpieces.

    All-round Sanding Problem Solution to Realize Mass Production

    Modular design of sanding components can be arranged and combined according to different sanding processes.

    Increasing sanding efficiency by 3-10 times and reducing manual work by more than 70%.


    Configuration description:


    1. The machine is equipped with 10 sets of sanding units, which are composed of six sets of sanding components.

    2. The first, second, third and fourth sets of sanding parts, eight groups of disc sanding units, 360 degree positive rotation and 360 degree reversal respectively, carry out all-round sanding and sanding on all corners of the workpiece;

    3. Fifth, sixth, set of sanding parts, two groups of straight sand roll sanding units, one positive and the other negative, large diameter sand roll large area sanding, the first several sanding lines are thoroughly dredged, and the concave convex surface is sanded.

    4. The machine is equipped with 10 125MM dust-collecting ports to ensure the dust-collecting effect. In order to achieve the best dust-collecting effect, the best wind speed in the dust-collecting exhaust pipe should be kept at about 30 m/s.

    5. The feed width is 1000 MM and 1300 MM.

    6. The equipment is equipped with an input and output material detection device, and the program regulates the start and stop of the sand rollers, which can effectively protect the head and tail of the workpiece and the protrusion from wearing sand.

    ?

    ?


    Excellent characteristics

    1. The machine has a wide range of applications. It can polish white blanks and paint sanding of planar special-shaped workpieces processed by various materials.

    2. High-strength structure fuselage to ensure stable operation of equipment.

    3. High wear-resistant belt to ensure smooth feeding.

    4. Touch screen man-machine interface, easy to operate, fast. PLC and frequency converter control conveying and each group of sanding components, independent speed regulation and independent lifting control. Sanding parameters of different workpieces can be stored in PLC for easy invocation.

    5. The pressing roll and sanding component can be adjusted independently, and the plate with deeper sanding groove can be sanded.

    6. Sanding parts can be pulled out as a whole, and abrasive replacement is convenient.

    7. The disc component has a patented fast-changing structure.

    8. A wide range of technical solutions and sanding units.

    9. Integral centralized sanding has good reliability and safety.


    Mechanical parameter description:

    Machine type

    SDG10/13-PPPPCC

    Maximum processing width

    50~1000 /1300mm

    Maximum processing height

    10~150 mm

    Minimum processing length

    450 mm

    Conveyor motor power

    2.2 kw

    Integral lift motor power

    1 x 1.1 kw

    Sand roller motor power

    2 x 1.5 kw

    Disc motor power

    4 x 1.1 kw

    Component fine-tuning motor power

    6 x 0.18 kw

    Swing motor power

    6 x 0.25 kw

    Feeding speed

    1-10 m/min

    Rotary speed of sand roll

    100-280 r/min

    Disk size

    4 x 9/11 x φ180

    Sand roll size

    2x φ380 x 1000/1300 mm

    Conveyor band width

    1000 /1300mm

    Power requirements

    3/PE 380V 50Hz

    Clean air pressure

    4~6Pa

    Working table height

    845mm

    Dust-collecting wind speed

    22m/s

    Vacuum cleaner

    φ125mm×10

    Total power supply

    13.28kw

    Machine size

    4860 x 1800 x 2050mm

    Machine weight

    4000 kg


    1.Equipment installation and debugging.

    Provide equipment installation and commissioning and operator training.


    2.What kind of abrasives can be used for sand edge and wooden thread sand head?

    The grinding head can use sponge wheel, abrasive belt, various grinding wheels, polishing wheels, brushes, abrasive strips, octagonal wheels, thousand impellers, flying wheel, polishing cloth wheel, steel wire wheel, nylon wheel, etc. and can install spiral rollers for abrasive polishing.


    Maintenance table

    Project

    Checking

    Use interval

    Operation content

    Conveyor belt

    Appearance check

    8 hours

    High pressure cleaning with compressed air

    Per week

    Clean with water and alcohol solution

    Per year

    )Adjust or replace (see 6.2.4)

    Tension and alignment check

    Per quarter

    If necessary, adjust the conveyor belt appropriately (see 6.2.4)

    Transporting press rolls

    Appearance check

    8 hours

    Use compressed air to clean the outer surface

    Pressure roller bearing

    Elastic and sliding test

    Per month

    See 6.2.3

    Swing component

    Pendulum axis inspection

    2 weeks

    See 6.1.2

    Bearing refueling

    1 month

    Filling SAE20# engine oil

    Main frame lifting chain, guide rod

    Chain, screw refueling

    Per quarter

    Add MV oil if needed

    Balance check

    1year

    Check that each lift guide moves and the distance is the same.

    Electrical appliances, electrical boxes

    Electric box cleaning

    1week

    Use compressed air to clean

    Protective inspection

    1year

    Use the table above 1000V.

    Component sliding frame

    Guide rod wear and visual inspection

    Per quarter

    Replace if necessary (see 6.4)

    Copper sleeve wear and clearance check

    1year

    Replace if necessary (see 6.4)

    Main lifting system
    Surface?

    Grease,visual inspection

    1500 hours (or 1 year)

    Check the wear of the brake components and replace if necessary (see 6.3)

    Disc assembly

    Visual inspection and operation test

    1week

    Perform some emergency stop tests (see 6.4)

    Sand roller assembly

    Visual inspection and operation test

    1week

    Perform some emergency stop tests (see 6.5)

    Brush wire rod

    Visual inspection and length test

    1week

    Replace if necessary (see 6.1)

    Abrasive strip

    Visual inspection and effect test

    2hours

    Replace if necessary (see 6.1)




    Transverse sanding unit (A1, A2 positive and negative group)

    The two groups of horizontal spiral roll positive and reverse sanding group sanded the transverse concave and convex surfaces of the workpiece, both sides of which can be sanded in place.


    360 degree disc sanding unit (P1, P2, P3, P4 positive and negative groups)

    Four groups of sanding units, 360 degrees forward and 360 degrees reverse respectively, carry out all-round polishing and sanding on all corners of the workpiece.


    Spiral Roller Sanding Unit (L1, L2 Reverse and Positive)

    Two groups of sanding units, positive and negative, large diameter sand roller large area sanding, the first several sanding grain for comprehensive sorting. The concave and convex surfaces are sanded.



    http://www.sandwell-sand.com/

    ? 亚洲 欧美 偷 自 乱 图片
    <tbody id="d4mwg"><pre id="d4mwg"></pre></tbody>

  • <dd id="d4mwg"><track id="d4mwg"></track></dd>

    <em id="d4mwg"></em>

  • <dd id="d4mwg"><center id="d4mwg"></center></dd>